SPACER FOR LOWERING DAMPERS, 2-PCS

The spacers allow the lowering of motorcycles in the rear area. The spacer is simply installed in the shock absorber, more precisely between the retaining ring of the sealing head and the sealing head itself. This limits the stroke of the shock absorber because the shock absorber can now deflect less by the height dimension of the spacer. The installation of the spacer has no effect on the functioning of the shock absorber. The spacer can be removed again and thus the bike can be moved back to the original height 

SPECIAL FEATURE:

Compared to the usual lowering spacers, this spacer is designed in 2 parts. Thus, this can be mounted without having to dismantle the piston rod, more precisely without having to dismantle the piston and sealing head or the foot of the piston rod. The spacer can be used with the piston rod installed. Thus, the damper does not have to be refilled and bled.   

The height of the spacer is 8mm. This corresponds to a lowering at the rear of about 24 mm.  

The spacer is available in diameter 46mm and 50mm and is therefore suitable for almost all common shock absorbers available

   Suitable for: