Product information "SLEEVES TO REDUCE THE SPRING TRAVEL (FORK)"
You are planning to lower your vehicle? Simply install the S-TECH reducing sleeves on the piston rod of the fork. For example, if you want to reduce the stroke of the fork by 35 mm, then simply place the corresponding number of sleeves (in this case: 3x 10mm plus 1x 5 mm) on the piston rod inside the cartridge tube, i.e. between the piston or the rebound spring (if present) and the cartridge head. This reduces the stroke of the fork by the same amount as the stack of sleeves. So if you install a total of 35 mm of sleeves then the stroke is shortened by 35 mm. This conversion is simple, fast and completely rebuildable!
Available sizes:
13 x 20 (di x Da) -> e.g. for all forks with 12 or 12.5 mm piston rods
15 x 22 (di x Da) -> e.g. for WP open cartridge forks with 14 mm piston rods
both sizes in 5 mm thickness as well as 10 mm thickness
Suitable for:
Related links to "SLEEVES TO REDUCE THE SPRING TRAVEL (FORK)"
