PREMIUM SLIDEBOOKS 45x15x2.5

 

PREMIUM FORK BUSHINGS 

PREMIUM plain bushes have a high-quality sliding layer compound with excellent self-lubricating properties and high wear resistance at the same time. Precise manufacturing ensures tight tolerances and high dimensional accuracy. These bushings are recommended for all those who have high demands on the response behavior and performance of their fork

Features:  

• very good sliding properties
• high proportion of self-lubricating components 
• low friction values, very low stick-slip effect, very good response behavior
• lower sensitivity to dirt ingress (contaminated oil) -> therefore good response for longer periods of time

Scope of delivery:

1 set (2 pieces)

 

S-TECH workshop tip:

• Clean the fork very thoroughly by disassembling the fork completely and rinsing all parts thoroughly. We recommend the cleaning agent MAXIMA SUSPENSION CLEAN
• Dry the parts thoroughly. There must be no solvent or cleaning agent residues in the fork components. 
• use high-quality fork oil as this is also very important for the running properties. We recommend the fork oil RACING FORK FLUID from MAXIMA.
• use the PREMIUM bushings together with the SKF Simmerring kits, which also optimize the friction coefficient, to achieve the best possible performance
• only use high-quality silicone-based grease (e.g. our Turmsilon) to lubricate the radial shaft seal. Do not use lubricating greases (e.g. bearing grease)! If no high-quality silicone grease is available, only dip the oil seals into the fork oil for lubrication before fitting.
• If possible, also use additives to improve the gliding properties, e.g. HKS fork glide improver. Before fitting, apply a small amount of HKS to the dust cap (coat the sliding surface), to the seal ring (apply a thin layer to the grease pad) and to the bushings. Also add 5-10 ml to the fork oil, mix it and pour it into the fork (for closed cartridges only into the outer chamber).
• Apply a high-quality lubricant such as Fin Lube TF Spray to the inner tubes (chrome tubes) before assembly to the inner tubes (chrome tubes) and polish it in.
• If possible, polish the inner tubes thoroughly using a polishing paste and a fine abrasive fleece. Clamping in a lathe and polishing using the cross-grinding method is suitable for this.
• The radial play on the bushing with the inner coating should not be greater than 0.15 mm. If this is greater, adjustment using a feeler gauge tape is recommended.

 

Suitable for: BETA RR_4T_400 2005 2010 BETA RR_4T_450 2005 2010 BETA RR_4T_520 2010 2010 BMW F650GS 2006 2013 BMW G450X 2006 2010 BMW HP2 2004 2006 GAS_GAS EC125 2003 2015 GAS_GAS EC200 2003 2015 GAS_GAS EC250 2003 2008 GAS_GAS EC300 2003 2008 GAS_GAS EC250F 2011 2012 GAS_GAS EC300F 2011 2012 GAS_GAS EC450FSE 2003 2008 GAS_GAS HALLEY450SM 2009 2009 GAS_GAS SM250 2003 2003 GAS_GAS SM450FSR 2007 2008 GAS_GAS MC125 2003 2003 GAS_GAS MC125 2004 2009 GAS_GAS MC250 2003 2009 GAS_GAS MC450FSR 2007 2007 GAS_GAS SM125 2003 2003 GAS_GAS SM125 2004 2009 GAS_GAS SM250 2003 2003 GAS_GAS SM250 2004 2005 GAS_GAS SM450FSE 2004 2005 GAS_GAS SM450FSR 2007 2008 HUSQVARNA CR125 1996 2008 HUSQVARNA CR250 1996 2004 2004 HUSQVARNA SM400R 2004 2004 HUSQVARNA SM450R 2003 2005 HUSQVARNA SM510R 2005 2005 HUSQVARNA SME610 1999 2001 HUSQVARNA SM570R 2001 2004 HUSQVARNA SM610R 2000 2001 HUSQVARNA SM630R 2010 2011 HUSQVARNA TC250 2002 2007 HUSQVARNA TC450 2003 2005 HUSQVARNA TC510 2005 2005 HUSQVARNA TC570 2001 2002 HUSQVARNA TC610 1999 2001 HUSQVARNA TE250 2003 2007 HUSQVARNA TE400 2001 2001 HUSQVARNA TE410 1996 2001 HUSQVARNA TE450 2003 2005 HUSQVARNA TE510 2004 2005 HUSQVARNA TE570 2001 2004 HUSQVARNA TE610 1999 2008 HUSQVARNA TE630 2010 2011 HUSQVARNA WR125 1996 2008 HUSQVARNA WR250 1999 2008 HUSQVARNA WR360 1996 2002 KTM 125EGS 1996 1999 KTM 200EGS 1998 1999 KTM 250EGS 1995 1996 KTM 300EGS 1995 1996 KTM 360EGS 1996 1996 KTM 125EXC 1996 1999 KTM 200EXC 1998 1999 KTM 250EXC 1995 1996 KTM 300EXC 1995 1996 KTM 360EXC 1996 1996 KTM 125SX 1996 1998 KTM 250SX 1995 1996 KTM 360SX 1996 1996 TM EN125_2T 1996 2004 TM EN250_2T 1996 2004 TM EN300_2T 2002 2004 TM EN300_2T 1997 2004 TM EN400FI_4T 2002 2003 TM EN450FI_4T 2004 2004 2004 TM EN530FI_4T 2002 2004 TM MX125_2T 1996 2004 TM MX250_2T 1996 2004 TM MX250FI_4T 2002 2004 TM MX300_2T 1997 2004 TM MX400F 2002 2003 TM MX450FI_4T 2004 2004 TM MX530FI_4T 2002 2004 TM MX85 2013 2015