No results were found for the filter!
WP-DAMPER SCREW, TITANIUM, INCL. O-RING SCREW PLUG NITROGEN TANK.
SUITABLE FOR ALL WP DAMPERS.
MATERIAL: TITANIUM
TYPE: M5 x 6MM, ISK4
INCL. O-RING
Suitable for:
SUITABLE FOR ALL WP DAMPERS.
MATERIAL: TITANIUM
TYPE: M5 x 6MM, ISK4
INCL. O-RING
Suitable for:
S-TECH SPRING PRELOAD RING WP (D50) - BLACK S-TECH anodized aluminum spring preload ring.
Suitable for:
- SX models with deflection from 2011 - 2022
- EXC models with PDS (50mm) from 2012- 2016
Suitable for:
Suitable for:
- SX models with deflection from 2011 - 2022
- EXC models with PDS (50mm) from 2012- 2016
Suitable for:
GAS VALVE WP DENT TYPE D58 GAS VALVE FOR FILLING WITHOUT WP NITROGEN STATION
WP D58MM
DIAMETER: 58MM
Suitable for:
KTM SX85 2012 2022
KTM EXC250 2017 2022
KTM EXC300 2017 2022
KTM EXC450F 2017 2022
KTM EXC250F 2017 2022
WP D58MM
DIAMETER: 58MM
Suitable for:
KTM SX85 2012 2022
KTM EXC250 2017 2022
KTM EXC300 2017 2022
KTM EXC450F 2017 2022
KTM EXC250F 2017 2022
GAS VALVE WP LINK FLAT TYPE GAS VALVE FOR FILLING WITHOUT WP NITROGEN STATION
WP LINK FROM 2016
DIAMETER: 64MM
Suitable for:
WP LINK FROM 2016
DIAMETER: 64MM
Suitable for:
SHOWA rebound needle shock absorber Length: 215mm
HONDA CRF250 2018-2020
HONDA CRF450 2017-2020
Without O-ring
Suitable for:
HONDA CRF250 2018 2023
HONDA CRF450 2017 2023
HONDA CRF250 2018-2020
HONDA CRF450 2017-2020
Without O-ring
Suitable for:
HONDA CRF250 2018 2023
HONDA CRF450 2017 2023
VALVE CAP FORK/SHOCK, 1 SET (5 PIECES) VALVE CAP (SCHRADER) FOR FORK OR SHOCK ABSORBER VALVES.
STEEL, SHORT (6,7MM), NICKEL PLATED WITH GASKET
1 SET (5 PIECES)
Suitable for:
STEEL, SHORT (6,7MM), NICKEL PLATED WITH GASKET
1 SET (5 PIECES)
Suitable for:
Nut for SHOWA piston rod M16x1,25 flat Nut for SHOWA piston rods (M16x1,25)
Design:
flat (6,90mm)
Original SHOWA spare part
Not self locking
Suitable for:
Design:
flat (6,90mm)
Original SHOWA spare part
Not self locking
Suitable for:
Spring preload rings SHOWA 50mm (1 set) ORIGINAL PRELOAD RINGS SHOWA.
FIT FOR ALL SHOWA BUMPS WITH 50MM PISTONS (=> THREAD M60x1,5)
1 PIECE SPRING RETAINER RING
1 PIECE LOCK NUT
Suitable for:
FIT FOR ALL SHOWA BUMPS WITH 50MM PISTONS (=> THREAD M60x1,5)
1 PIECE SPRING RETAINER RING
1 PIECE LOCK NUT
Suitable for:
Rebound damping adjustment screw for WP shock... Complete set:
- Rebound stage screw
- O-ring
- Spring
- Balls
- Guide
Suitable for:
- Rebound stage screw
- O-ring
- Spring
- Balls
- Guide
Suitable for:
Schrader valve M8x1, 1 piece SUITABLE FOR MOST SHOCK ABSORBERS OR ALSO FOR THE KYB AIR FORKS
Incl. O-ring
Suitable for:
Incl. O-ring
Suitable for:
BUD SPRING PRELOAD RING WP (D50) BUD spring preload ring made of anodized aluminum.
Suitable for:
- SX models with deflection from 2011 - 2022
- EXC models with PDS (50mm) from 2012- 2016
Suitable for:
Suitable for:
- SX models with deflection from 2011 - 2022
- EXC models with PDS (50mm) from 2012- 2016
Suitable for:
Shock absorber bearing GE12UK Shock absorber bearing GE12UK
Radial spherical plain bearing for BUD shock absorber
Type: GE12UK 12 x 22 mm
Suitable for:
Radial spherical plain bearing for BUD shock absorber
Type: GE12UK 12 x 22 mm
Suitable for:
Shock absorber bearing GE15UK Shock absorber bearing GE15UK
Radial spherical plain bearing for BUD shock absorber
Type: GE15UK, 15 x 26 mm
Suitable for:
Radial spherical plain bearing for BUD shock absorber
Type: GE15UK, 15 x 26 mm
Suitable for:
Nut for SHOWA piston rod M12x1,25 flat Self-locking nut for Showa piston rods (M12x1,25)
Suitable for:
Suitable for:
Special filling screw for WP shock absorbers Special filling screw for WP shock absorbers as a replacement for the WP ISK screw. Needle filling -> no WP filling device required.
Suitable for:
Suitable for:
Rubber plug for needle filling (5.70/100mm) Rubber stopper for needle filling.
Supplied in a piece of 100 mm.
This results in about 20 pieces of rubber stoppers.
Diameter:
D= 5.70 mm
Suitable for:
Supplied in a piece of 100 mm.
This results in about 20 pieces of rubber stoppers.
Diameter:
D= 5.70 mm
Suitable for:
