No results were found for the filter!
NEW
NEW
S-TECH OIL-LEVEL TOOL TOOLS FOR ADJUSTING THE ÖLSTAND ANd FORKS
- 200 ML LARGE VOLUME ->> ADJUST THE OIL LEVEL IN JUST ONE OPERATION, EVEN WITH LARGE-VOLUME FORKS
- SUCTION HEIGHT CAN BE ADJUSTED QUICKLY AND EASILY USING THE SCALE AND LOCKABLE SLIDER
Suitable for:
- 200 ML LARGE VOLUME ->> ADJUST THE OIL LEVEL IN JUST ONE OPERATION, EVEN WITH LARGE-VOLUME FORKS
- SUCTION HEIGHT CAN BE ADJUSTED QUICKLY AND EASILY USING THE SCALE AND LOCKABLE SLIDER
Suitable for:
S-TECH tensioning strap set (2 pieces) - 40mm wide straps
- approx. 2m max. strap length
- with handlebar protection loop
Suitable for:
- approx. 2m max. strap length
- with handlebar protection loop
Suitable for:
S-TECH MUD FILLER The S-TECH mud spatula is your little quick helper for removing mud/dirt e.g. between your training or racing runs. Each mud scraper comes with an ergonomic S-TECH rubber grip.
Available in the colors
- black/red
- red/red
- black/orange
Suitable for:
Available in the colors
- black/red
- red/red
- black/orange
Suitable for:
S-TECH OIL DRAINAGE AID OIL DRAIN AID KTM/HUSQVARNA
Connection hose with adapter for connection directly to the oil drain hole.
KTM 125/250/300 XC/EXC/XCW//SX 2017-2023
HUSQVARNA 125/250/300 TC/TE/TX 2017-2023
GAS EC/MC 125-300 2021-2023
Suitable for:
Connection hose with adapter for connection directly to the oil drain hole.
KTM 125/250/300 XC/EXC/XCW//SX 2017-2023
HUSQVARNA 125/250/300 TC/TE/TX 2017-2023
GAS EC/MC 125-300 2021-2023
Suitable for:
S-TECH SAG GAUGE - SAG SCALE GAUGE FOR QUICK AND EASY ADJUSTMENT OF THE SAG!
MEASUREMENT ON REAR WHEEL AND FORK POSSIBLE
ZERO POINT ADJUSTABLE, THEREFORE NO MORE CALCULATIONS NECESSARY. THE MEASURED VALUE IS DISPLAYED DIRECTLY
CLAPPABLE. THEREFORE SMALL TRANSPORT DIMENSIONS
FOR MINI AND BIG BIKES
Suitable for:
MEASUREMENT ON REAR WHEEL AND FORK POSSIBLE
ZERO POINT ADJUSTABLE, THEREFORE NO MORE CALCULATIONS NECESSARY. THE MEASURED VALUE IS DISPLAYED DIRECTLY
CLAPPABLE. THEREFORE SMALL TRANSPORT DIMENSIONS
FOR MINI AND BIG BIKES
Suitable for:
S-Tech exhaust repair kit FOR REPAIRING DENTS IN EXHAUST BULBS.
--SUITABLE FOR ALMOST ALL MX AND ENDURO EXHAUST BULBS--
Suitable for:
--SUITABLE FOR ALMOST ALL MX AND ENDURO EXHAUST BULBS--
Suitable for:
S-TECH T-WRENCH SET 1/4 INCH 6/8/10MM S-TECH T-WOYS WITH 3x 1/4 INCH RECEPTIONS
- TO FIT 3 NUTS AT THE SAME TIME
- INCLUDED IN DELIVERY 6/8/10MM NUT
Suitable for:
- TO FIT 3 NUTS AT THE SAME TIME
- INCLUDED IN DELIVERY 6/8/10MM NUT
Suitable for:
S-TECH CHAIN SEPARATOR FOR STANDARD & O-RING... S-TECH CHAIN SEPARATOR
Ideal for cutting O-ring, X-ring and standard chains
Suitable for the following chains: 420, 428, 428H, 520, 520H, 525, 525H, 530, 530H, 630, 630H
Suitable for:
Ideal for cutting O-ring, X-ring and standard chains
Suitable for the following chains: 420, 428, 428H, 520, 520H, 525, 525H, 530, 530H, 630, 630H
Suitable for:
S-TECH POWER VALVE ADJUSTMENT TOOL FOR KTM/ HUSQVARNA
KTM 250CC -> 2016
HUSQVARNA -> 2014 -2016
HUSABERG -> TE 2011 - 2014
Suitable for:
KTM 250CC -> 2016
HUSQVARNA -> 2014 -2016
HUSABERG -> TE 2011 - 2014
Suitable for:
S-TECH TIRE LEVER 380MM S-TECH Mounting Iron :
Extremely robust, long and ergonomically shaped mounting irons. Ideal also for mounting mousse.
- Scope of delivery: 1 piece
- Length: 380 mm
- Extremely robust
Suitable for:
Extremely robust, long and ergonomically shaped mounting irons. Ideal also for mounting mousse.
- Scope of delivery: 1 piece
- Length: 380 mm
- Extremely robust
Suitable for:
WHEEL BEARING EXTRACTOR SET Tool for disassembly of wheel bearings.
Drift diameter (=bearing inner diameter):
10 mm
12 mm
15 mm
17 mm
20 mm
25 mm
Suitable for:
Drift diameter (=bearing inner diameter):
10 mm
12 mm
15 mm
17 mm
20 mm
25 mm
Suitable for:
SPOKE WRENCH SET 4 KEYS WITH THE FOLLOWING KEY WIDTHS:
KEY 1:
5.6mm, 5.7mm, 6.0mm, 6.3mm, 6.6mm, 6.8mm
KEY 2:
5.0mm, 5.4mm, 5.8mm, 6.2mm, 6.4mm, 7.0mm
KEY 3:
5.1mm, 5.5mm, 6.1mm, 6.5mm, 6.7mm, 6.9mm
KEY 4:
4.0mm, 7.1mm, 7.4mm, 5.6mm, 6.0mm, 6.2mm
Suitable for:
KEY 1:
5.6mm, 5.7mm, 6.0mm, 6.3mm, 6.6mm, 6.8mm
KEY 2:
5.0mm, 5.4mm, 5.8mm, 6.2mm, 6.4mm, 7.0mm
KEY 3:
5.1mm, 5.5mm, 6.1mm, 6.5mm, 6.7mm, 6.9mm
KEY 4:
4.0mm, 7.1mm, 7.4mm, 5.6mm, 6.0mm, 6.2mm
Suitable for:
SAG GAUGE - SAG SCALE (II) GAUGE FOR QUICK AND EASY ADJUSTMENT OF THE SAG!
MEASUREMENT POSSIBLE ON THE REAR WHEEL AND ON THE FORK
ZERO POINT CAN BE SET, ELIMINATING THE NEED FOR CALCULATIONS. THE MEASURED VALUE IS DISPLAYED DIRECTLY
FOLDABLE. THEREFORE SMALL TRANSPORT DIMENSIONS
FOR MINI AND LARGE BIKES
Suitable for:
MEASUREMENT POSSIBLE ON THE REAR WHEEL AND ON THE FORK
ZERO POINT CAN BE SET, ELIMINATING THE NEED FOR CALCULATIONS. THE MEASURED VALUE IS DISPLAYED DIRECTLY
FOLDABLE. THEREFORE SMALL TRANSPORT DIMENSIONS
FOR MINI AND LARGE BIKES
Suitable for:
S-TECH safety wire for grip rubber 30m SAFETY WIRE FOR GRIPS. PREVENTS THE HANDLES FROM SLIPPING OFF THE HANDLEBARS.
WIRE THICKNESS: 0.7 mm
WIRE LENGTH: 30 meter
Suitable for:
WIRE THICKNESS: 0.7 mm
WIRE LENGTH: 30 meter
Suitable for:
S-TECH Brake Lock - brake lever locking device SAFETY LOCK FOR THE BRAKE LEVER. PROVIDES FOR A SAFE STAND OF THE MOTORBIKE e.g.:
DURING TRANSPORT
IN THE WORKSHOP
OR ON A SLOPING SURFACE
UNIVERSAL DESIGN - SUITABLE FOR ALL BRAKE LEVERS.
Suitable for:
DURING TRANSPORT
IN THE WORKSHOP
OR ON A SLOPING SURFACE
UNIVERSAL DESIGN - SUITABLE FOR ALL BRAKE LEVERS.
Suitable for:
Adapter zum Öffnen SHOWA SFF-AIR Universaladapter mit drei Schlüsselweiten für die Fahrwerkswerkstatt. Die 22mm Seite hat eine Bohrung und eignet sich somit z.B. als Adaptereinsatz zum Öffnen der SHOWA SFF-AIR Gabel der CRF 250 (Verschraubung mit Ventil).
Schlüsselweiten:
19 mm
22 mm
24 mm
Passend für:
HONDA CRF250R 2015 2016
KAWASAKI KX450F 2015 2016
SUZUKI RM-Z450 2015 2016
Schlüsselweiten:
19 mm
22 mm
24 mm
Passend für:
HONDA CRF250R 2015 2016
KAWASAKI KX450F 2015 2016
SUZUKI RM-Z450 2015 2016
S-TECH 2-in-1-Luftpumpe für Fahrwerke und Reifen 2-in-1 LUFTPUMPE FÜR FAHRWERKE UND FÜR REIFEN:
1. Präzises Einstellen des Luftdrucks bei luftgefederten Gabeln und Stossdämpfer mittels kleinem Hub und hochwertigem Messsensor und digitaler Anzeige
sowie
2. Aufpumpen von Reifen oder Luftgabeln mittels einem entriegelbarem Zweitzylinder mit großem Hubvolumen
Passend für:
1. Präzises Einstellen des Luftdrucks bei luftgefederten Gabeln und Stossdämpfer mittels kleinem Hub und hochwertigem Messsensor und digitaler Anzeige
sowie
2. Aufpumpen von Reifen oder Luftgabeln mittels einem entriegelbarem Zweitzylinder mit großem Hubvolumen
Passend für:
Rubber plug for needle filling (5.70/100mm) Rubber stopper for needle filling.
Supplied in a piece of 100 mm.
This results in about 20 pieces of rubber stoppers.
Diameter:
D= 5.70 mm
Suitable for:
Supplied in a piece of 100 mm.
This results in about 20 pieces of rubber stoppers.
Diameter:
D= 5.70 mm
Suitable for:
