Close filters
Filter
No results were found for the filter!
S-TECH TOOL FOR SETTING THE PRESSURE LEVEL...
S-TECH TOOL FOR SETTING THE PRESSURE STAGE
- NO DISASSEMBLY OF THE HANDLEBARS NECESSARY.
- THE SMALL 25MM DIAMETER ALLOWS THE TOOL TO BE USED EVEN ON INACCESSIBLE ADJUSTERS.
Suitable for:
HONDA CRF450R 2017 2024
HONDA CRF250R 2019 2024
KAWASAKI KX450F 2019 2024
SUZUKI RM-Z450 2018 2024
- NO DISASSEMBLY OF THE HANDLEBARS NECESSARY.
- THE SMALL 25MM DIAMETER ALLOWS THE TOOL TO BE USED EVEN ON INACCESSIBLE ADJUSTERS.
Suitable for:
HONDA CRF450R 2017 2024
HONDA CRF250R 2019 2024
KAWASAKI KX450F 2019 2024
SUZUKI RM-Z450 2018 2024
S-TECH FACE WRENCH, ADJUSTABLE
Adjustable face wrench with interchangeable pins in various sizes
-3mm
-4mm
-5mm
Suitable for:
-3mm
-4mm
-5mm
Suitable for:
S -TECH PISTON ROD HOLDER
Plate for holding the fork piston rod
allows the piston rod screw connection to be loosened
Combination holder (suitable for Ø10, Ø12 , Ø12.5 , Ø14 )
Aluminium T6061 - CNC machined, anodized
Suitable for:
allows the piston rod screw connection to be loosened
Combination holder (suitable for Ø10, Ø12 , Ø12.5 , Ø14 )
Aluminium T6061 - CNC machined, anodized
Suitable for:
S-TECH FORK OIL INJECTOR
TOOL FOR ADJUSTING THE SPRING CHARACTERISTIC/AIR CHAMBER OF THE FORK
MORE PROGRESSION AND PUNCTURE RESISTANCE BY ADDING FORK OIL
EXACT DOSAGE BY MEANS OF SCALING AND VOLUME LOCKING
MODIFICATION OF THE SPRING CHARACTERISTIC DIRECTLY ON THE TRACK
NO NEED TO REMOVE THE FORK
A MUST FOR THE TOOLBOX OF EVERY OFFROAD RIDER
Suitable for:
MORE PROGRESSION AND PUNCTURE RESISTANCE BY ADDING FORK OIL
EXACT DOSAGE BY MEANS OF SCALING AND VOLUME LOCKING
MODIFICATION OF THE SPRING CHARACTERISTIC DIRECTLY ON THE TRACK
NO NEED TO REMOVE THE FORK
A MUST FOR THE TOOLBOX OF EVERY OFFROAD RIDER
Suitable for:
S-TECH OIL-LEVEL TOOL
TOOLS FOR ADJUSTING THE ÖLSTAND ANd FORKS
- 200 ML LARGE VOLUME ->> ADJUST THE OIL LEVEL IN JUST ONE OPERATION, EVEN WITH LARGE-VOLUME FORKS
- SUCTION HEIGHT CAN BE ADJUSTED QUICKLY AND EASILY USING THE SCALE AND LOCKABLE SLIDER
Suitable for:
- 200 ML LARGE VOLUME ->> ADJUST THE OIL LEVEL IN JUST ONE OPERATION, EVEN WITH LARGE-VOLUME FORKS
- SUCTION HEIGHT CAN BE ADJUSTED QUICKLY AND EASILY USING THE SCALE AND LOCKABLE SLIDER
Suitable for:
ADAPTER INSERT PRESSURE STAGE UNIT WP CONE VALVE
Adapter insert for opening the compression unit of the WP Conve Valve / Pro Components fork
Suitable for:
Suitable for:
S-TECH seal carrier wrench WP ProComponents
Special wrench for the 48mm Cone Valve seal carrier. Open version: Can also be used when the fork is installed.
COLOR: RED
Suitable for:
COLOR: RED
Suitable for:
S-TECH PIN WRENCH (0-38MM)
Spigot wrench for holding/opening e.g. the
- SHOWA compression unit (fork)
- Cartridge tubes
Suitable for:
- SHOWA compression unit (fork)
- Cartridge tubes
Suitable for:
RETAINING CLIP FOR FORK TUBES
For holding/fastening fork tubes
Material: Stainless steel (rustproof), PVC coated
Suitable for:
Material: Stainless steel (rustproof), PVC coated
Suitable for:
S-TECH spring preload wrench WP CONE VALVE
KEY FOR ADJUSTING THE SPRING PRELOAD OF
WP CONE VALVE / XACT-PRO FORKS
THE KEY IS ALSO REQUIRED TO SERVICE THE CARDRIGE
SW 35MM
T=4MM
Suitable for:
WP CONE VALVE / XACT-PRO FORKS
THE KEY IS ALSO REQUIRED TO SERVICE THE CARDRIGE
SW 35MM
T=4MM
Suitable for:
S-TECH fork cover wrench WP48 50mm hexagon
2 in 1 tool:
1. Key for opening the WP fork.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 50 mm
- hexagonal
- Incl. spindle holder
Suitable for all WP forks:
- Closed Cartridge
- Open Cartridge
- 4CS
- Xplor
*COLOR: RED
Suitable for:
1. Key for opening the WP fork.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 50 mm
- hexagonal
- Incl. spindle holder
Suitable for all WP forks:
- Closed Cartridge
- Open Cartridge
- 4CS
- Xplor
*COLOR: RED
Suitable for:
S-TECH fork cover wrench WP43 45mm hexagon
2 in 1 tool:
1. Key for opening the AER43 WP fork.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 45mm
- hexagonal
- Incl. spindle holder
*COLOR: RED
Suitable for:
1. Key for opening the AER43 WP fork.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 45mm
- hexagonal
- Incl. spindle holder
*COLOR: RED
Suitable for:
S-TECH fork cover wrench WP35 40mm hexagon
2 in 1 tool:
1. Key for opening the AER35 WP fork.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 40mm
- hexagonal
- Incl. spindle holder
*COLOR: RED
Suitable for:
1. Key for opening the AER35 WP fork.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 40mm
- hexagonal
- Incl. spindle holder
*COLOR: RED
Suitable for:
S-TECH fork cover wrench SHOWA 50mm 8-edge
2 in 1 tool:
1. Key for opening Showa forks.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 50mm
- 8-edge
- Incl. spindle holder
*COLOR: RED
Suitable for:
1. Key for opening Showa forks.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 50mm
- 8-edge
- Incl. spindle holder
*COLOR: RED
Suitable for:
S-TECH fork cover wrench KAYABA 49mm 8-edge
2 in 1 tool:
1. Key for opening Kayaba forks with 49mm fork caps.
2. Spindle holder (slot for holding the piston rod).
- Wrench size 49mm
- 8-edge
- Incl. spindle holder
*COLOR: RED
Suitable for:
1. Key for opening Kayaba forks with 49mm fork caps.
2. Spindle holder (slot for holding the piston rod).
- Wrench size 49mm
- 8-edge
- Incl. spindle holder
*COLOR: RED
Suitable for:
S-TECH fork cover wrench SACHS/ZF 50mm 10-edge
2 in 1 tool:
1. Key for opening ZF/Sachs forks with 50mm fork caps.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 50mm
- 10-edge
- Incl. spindle holder
*COLOR: RED
Suitable for:
1. Key for opening ZF/Sachs forks with 50mm fork caps.
2. Spindle holder (slot for holding the piston rod).
- Width across flats 50mm
- 10-edge
- Incl. spindle holder
*COLOR: RED
Suitable for:
Öhlins fork cap tool 8-pin
TOOL FOR OPENING ÖHLINS FORKS
Number of pins: 8 pieces
Bolt circle diameter: 42 mm
Pin diameter: 2.50 mm
Suitable for:
Number of pins: 8 pieces
Bolt circle diameter: 42 mm
Pin diameter: 2.50 mm
Suitable for:
Mounting sleeves fork seal rings (set of 8),
Plastic mounting sleeves for mounting fork seal rings.
8-piece set consisting of :
36 MM
41 MM
43 MM
45 MM
46 MM
47 MM
48 MM
49 MM
Suitable for:
8-piece set consisting of :
36 MM
41 MM
43 MM
45 MM
46 MM
47 MM
48 MM
49 MM
Suitable for:
S-TECH TOOL FOR PRESSURE STAGE KYB
S-TECH TOOL FOR SETTING THE PRESSURE STAGE
-NO DISASSEMBLY OF THE HANDLEBARS NECESSARY
-WITH GUIDANCE
Suitable for all KAYABA CC forks.
Suitable for:
-NO DISASSEMBLY OF THE HANDLEBARS NECESSARY
-WITH GUIDANCE
Suitable for all KAYABA CC forks.
Suitable for:
S-TECH TOOL FOR ÖHLINS FORKS
S-TECH TOOL FOR OPENING ÖHLINS FORKS
Bolt circle diameter: 39 mm
Pin diameter: 3.50 mm
Suitable for:
Bolt circle diameter: 39 mm
Pin diameter: 3.50 mm
Suitable for:
S-TECH TOOL TO RELIEVE THE SPRING
S-TECH TOOL FOR RELIEVING THE FORK SPRINGS
- Facilitates/simplifies the removal of the fork spring on road vehicles !
Suitable for:
- Facilitates/simplifies the removal of the fork spring on road vehicles !
Suitable for:
S-TECH TOOL FOR WP XPLOR FORK
S-TECH TOOL FOR DETACHING THE FORK COVER FROM THE PISTON ROD.
- FOR WP XPLOR FORKS WITH EXTERNAL SPRING PRELOAD
Suitable for:
- FOR WP XPLOR FORKS WITH EXTERNAL SPRING PRELOAD
Suitable for:
Tool for Showa pressure stage unit
2 in 1 tool:
- For opening the compression unit of all Showa forks.
- E.G. CRF 250/450 2018-2021
- SFF AIR UVM
- 1/2 INCH MOUNT
Suitable for:
- For opening the compression unit of all Showa forks.
- E.G. CRF 250/450 2018-2021
- SFF AIR UVM
- 1/2 INCH MOUNT
Suitable for:
TOOL FOR DISASSEMBLY OF K-TECH SPRING KIT
Tool for dismantling the spring preload unit for K-TECH fork spring kits
Suitable for:
Suitable for:
PISTON ROD EXTENSION/HOLDER (SACHS) M13X1.0
Tool for pulling out and holding the fork piston rod
-> to bleed the fork
-> to pull out the piston rod for fitting the screw connection
Thread sizes:
M13 x 1.0
Suitable for:
-> to bleed the fork
-> to pull out the piston rod for fitting the screw connection
Thread sizes:
M13 x 1.0
Suitable for:
REPLACEMENT CANNULA FOR NEEDLE FILLING DEVICE,...
REPLACEMENT CANNULA SUITABLE FOR OUR NEEDLE FILLING DEVICES WITH ARTICLE NO:
213-900-010
70240
1 set (10 pieces)
Suitable for:
213-900-010
70240
1 set (10 pieces)
Suitable for:
Nitrogen filling device for needle + Schrader
Universal tool for filling shock absorbers with Schrader valve
Schrader valve and
Rubber plugs (needle filling)
Suitable for:
Schrader valve and
Rubber plugs (needle filling)
Suitable for:
PISTON ROD EXTENSION/ HOLDER (4 in 1)
Tool for pulling out and holding the fork piston rod
-> to bleed the fork
-> to pull out the piston rod for fitting the screw connection
-> 4 thread sizes integrated, allowing the most common piston rods to be accommodated.
-> extra long version (L=300 mm)
4 thread sizes:
- M12 x 1.25
- M12 x 1.0
- M10 x 1.25
- M10 x 1.0
Suitable for:
-> to bleed the fork
-> to pull out the piston rod for fitting the screw connection
-> 4 thread sizes integrated, allowing the most common piston rods to be accommodated.
-> extra long version (L=300 mm)
4 thread sizes:
- M12 x 1.25
- M12 x 1.0
- M10 x 1.25
- M10 x 1.0
Suitable for:
Adapter insert compression unit SACHS fork (CC)
Adapter insert for opening the compression unit of the SACHS fork (Closed Cartridge)
SW: 38/24
Suitable for:
SW: 38/24
Suitable for:
Tool set for changing the SHOWA BPF springs
Tool for changing the fork springs of the SHOWA BIG PISTON FORK
Suitable for:
Suitable for:
Adapter for opening SHOWA SFF-AIR
Universal adapter with three wrench sizes for the chassis workshop. The 22 mm side has a hole and is therefore suitable, for example, as an adapter insert for opening the SHOWA SFF-AIR fork of the CRF 250 (screw connection with valve).
Width across flats:
19 mm
22 mm
24 mm
Suitable for:
HONDA CRF250R 2015 2016
KAWASAKI KX450F 2015 2016
SUZUKI RM-Z450 2015 2016
Width across flats:
19 mm
22 mm
24 mm
Suitable for:
HONDA CRF250R 2015 2016
KAWASAKI KX450F 2015 2016
SUZUKI RM-Z450 2015 2016
Simmerring driver
High-quality driver for fitting radial shaft seals.
Sizes:
35 mm
36 mm
37 mm
41 mm
43 mm
45 mm
46 mm
46/47 mm
47 mm
48 mm
49 mm
50 mm
Suitable for:
Sizes:
35 mm
36 mm
37 mm
41 mm
43 mm
45 mm
46 mm
46/47 mm
47 mm
48 mm
49 mm
50 mm
Suitable for:
ADAPTER INSERT PRESSURE STAGE UNIT WP (CC/AER)
Adapter insert for opening the compression unit of the WP Closed Cartridge fork
or the damping side of the WP AER FORK .
Suitable for:
or the damping side of the WP AER FORK .
Suitable for:
Adapter insert for SHOWA/KYB
Adapter insert for opening the pressure stage unit of the:
SHOWA SFF-AIR fork
all SHOWA Closed Cartridge forks
all KYB Closed Cartridge forks
and
the cover of the spring side of the SHOWA SFF fork.
Dimensions: 36 / 19
Suitable for:
SHOWA SFF-AIR fork
all SHOWA Closed Cartridge forks
all KYB Closed Cartridge forks
and
the cover of the spring side of the SHOWA SFF fork.
Dimensions: 36 / 19
Suitable for:
S-TECH 2-in-1 air pump for suspensions and tires
2-in-1 AERIAL PUMP FOR VEHICLES AND FOR TIRES:
1. Precise adjustment of the air pressure for air-sprung forks and shock absorbers by means of a small stroke and high-quality measuring sensor and digital display
and
2. Inflation of tires or air forks using an unlockable second cylinder with a large stroke volume
Suitable for:
1. Precise adjustment of the air pressure for air-sprung forks and shock absorbers by means of a small stroke and high-quality measuring sensor and digital display
and
2. Inflation of tires or air forks using an unlockable second cylinder with a large stroke volume
Suitable for:
Key for fork cover WP 4CS
Face wrench for fork covers:
- WP 4CS
- WP Open Cartridge
Bolt circle diameter: 39 mm
Suitable for:
- WP 4CS
- WP Open Cartridge
Bolt circle diameter: 39 mm
Suitable for:
ADAPTER FOR CHANGING THE SPRINGS SX 50/65 - 2012
Tool for changing the fork springs (WP35).
KTM SX50 (from 2012)
KTM SX65 (from 2012)
Suitable for:
KTM SX50 (from 2012)
KTM SX65 (from 2012)
Suitable for:
Oil level adjustment tool
For quick and precise adjustment of the oil level or air chamber
Suitable for:
Suitable for:
Tool set for changing the fork springs
4-piece tool set for removing and fitting fork springs.
Suitable for:
Suitable for:
ADAPTER INSERT FOR CARTRIDGE HEADS 17/19MM
- WRENCH SIZE: 17 / 19 MM HEXAGONAL
- WITH HOLLOW BORE - ALLOWS DISASSEMBLY EVEN WITH PISTON ROD INSTALLED
- SUITABLE FOR ALL CARTRIDGE HEADS WITH 17MM OR 19MM HEXAGON SOCKET
Suitable for:
- WITH HOLLOW BORE - ALLOWS DISASSEMBLY EVEN WITH PISTON ROD INSTALLED
- SUITABLE FOR ALL CARTRIDGE HEADS WITH 17MM OR 19MM HEXAGON SOCKET
Suitable for: